Is Thompson's water Seal poisonous?

Thompson's is a horrible product and it's not a true water proofer. It's akin to putting silicone on your shoes to water proof them, as soon as you scuff the surface it's gone. Of course it is also toxic to fish.

How long does it take Thompson's water Seal to dry before you can walk on it?

Now that you've applied Thompson's Water Seal following the instructions above, to your entire surface, you can walk away and let it dry for 24 hours. That's all the time you need to let Thompson's Water Seal work to protect your outdoor surfaces from water damage.

Is Thompson's water Seal water or oil based?

Thompson's^® WaterSeal^® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson's^® WaterSeal^® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

Why is my Thompson Water Seal sticky?

If the weather is too cold, your Thompson water seal layer will just stay there and not dry as it should. Ideally, the sealant will dry best in temperatures above 50°F. If the thermometer units dip below this level during or soon after application, the deck may stay sticky for longer than 24 hours.

Thompson’s WaterSeal Review, Does It Work?!

Does Thompson Water Seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

Does Thompson Water Seal need two coats?

Thompson's WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.

Can I use 2 coats of Thompson's water Seal?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

Is Thompson Water Seal worth it?

Is Thompson's WaterSeal Any Good? Our experience with Thompson's WaterSeal Waterproofer Plus Clear Wood Protector was disappointing overall, and we would not recommend this product. Its inability to prevent UV graying is too harmful to your deck's wood.

Is Thompson water Seal acrylic?

Thompsons WaterSeal Deck & House 100 Percent Acrylic Latex Waterproofing Solid Stain, Russet 16141 enhances the natural beauty of wood by adding exceptional fade resistant beautiful color that hides the wood grain while allowing wood texture to show. This formula is available in 67 rich tones.

How long does Thompson's Water Seal last?

Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

How long does Thompson water Seal take to dry on concrete?

Allow at least 24 hours to dry; however drying time will vary depending on the substrate, temperature and humidity. When completely dry, perform the splash test to determine if second coat is necessary.

What sealant is safe for pets?

Why are so many Animal Habitats, Animal Kennels and Zoos using SANI-TRED as the best non-toxic waterproof sealant solution for the flooring, cages and overall animal sanctuaries. Because it lasts! With our proven formula SaniTred has stood the test of time. It has outlasted all the other products on the market today.

Are ready seals safe for pets?

It is recommended to keep all pets and animals away from any sealed surfaces until they are adequately dried. Ready Seal is safe to use in barns and stables. If your animal chews on wood sealed with Ready Seal contact your veterinarian.

What is the best way to apply Thompson's Water Seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

How do you remove Thompson water Seal?

Some good choices for this are Krud Kutter or Simple Green. Use a scrub brush to increase the effectiveness of the degreaser. If the scrub brush is not strong enough, you can use a wire brush instead. Thoroughly rinse the area after scrubbing to remove the residue from the sealant and cleaner.

Is it better to stain or seal a deck?

Deck sealing will protect the wood from splitting, cracking, moisture, mildew, and rot while maintaining the color and grain of the wood. A stain will protect the wood and provides a more uniform tint or color to the wood to complement surrounding structures.

Can Thompson Water Seal go over stain?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

Should I use Thompson Water Seal on pressure treated wood?

Some, like Thompson's^® WaterSeal^® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's^® WaterSeal^® Waterproofing Stain, can be applied immediately to new pressure treated lumber.

What is the best waterproof sealer for wood?

According to them, these are the nine most effective wood sealers:

• Thompson's Water Seal. ...
• Rainguard Premium Wood Sealer. ...
• DEFY Crystal Clear Sealer. ...
• Anchorseal 2. ...
• Roxil Wood Protection Cream. ...
• Eco-Advance Exterior Wood Waterproofer. ...
• Ready Seal Stain and Sealer for Wood. ...
• Pure Tung Oil Natural Wood Sealer.

Is Thompson water Seal supposed to be white?

Product will appear milky white during application, but will dry clear. If puddling of product occurs, remove within 15 minutes by redistributing to dry areas or wiping off. Tackiness will result if over-applied. May also occur after application if overnight temperature falls below 40°F within 48 hours of application.

Why is my deck sticky after sealing?

"A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. We recommend our Penofin Pro-Tech Cleaner Step 2. This is a product that comes in powder form. You mix 1 cup to a gallon of water, wet the wood and apply the solution to the wood surface.

Does Thompsons water Seal dry?

DRYING TIME Thompson's Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you're coating. Remove as much product as possible from equipment before cleaning. All equipment should be cleaned immediately after use with detergent and warm water.