What do you say on a VHF radio?

And other boaters will certainly take you more seriously.

1. Proper calls on the VHF Radio start with repeating the name of the boat you're calling and the name of your own boat a full three times. ...
2. When you're done speaking into the mic, say “over.” ...
3. Use the NATO phonetic alphabet when speaking letters.

How do you call into a marina on VHF?

How do I use it?

1. Call the vessel, marina or restaurant on Channel 9 in the following manner.
2. Name of station being called, spoken three times.
3. The words "THIS IS", spoken once.
4. Name of your vessel spoken once.
5. The word "OVER".
6. Then you wait for the station being called to answer.

How do you talk over a radio?

4 Golden Rules fo Radio Communication

1. Clarity. Your voice should be clear. Speak a little slower than normal. Speak in a normal tone, do not shout.
2. Simplicity. Keep your message simple enough for intended listeners to understand.
3. Brevity. Be precise and to the point.
4. Security.

How can I talk like a military radio?

Best Practices

1. Identify with whom you want to communicate by using their call sign.
2. Pause a moment after pressing the “push-to-talk” (PTT) button.
3. Be direct and short when communicating.
4. Speak slowly and clearly.
5. Spell out letters and numbers, using the Military Alphabet (NATO Phonetic Alphabet.

How To Make A VHF Radio Call For Boaters

How do you answer VHF?

Saying their name back right away grabs their attention immediately. There is no need to state their name and then your name three times each. Once is fine when you're responding to a call. For example, to respond to Christine, the response would simply be, “Christine, this is Annabelle.

How do you respond to distress signal at sea?

In conclusion, when receiving a marine distress call : Log and monitor the distress call, • If no other station responds, answer/acknowledge the call. Then attempt to relay information to an RCC or other vessels in the area that may be better suited or more capable of effectively rendering aid.

How do you hail a marine radio?

Children should be taught proper radio use and should never be left unattended near a radio. To hail another vessel, simply call the name of the vessel two or three times, followed by your own vessel's name and station ID if applicable. Wait for a response then immediately switch to a working channel.

What do you say for a radio check?

INITIATING A RADIO CHECK The person initiating a radio check should say: • The callsign of the station being called. The words “THIS IS.” • The callsign of the station calling. The prowords “RADIO CHECK” (meaning, “What is my signal strength and readability? How do you hear me?”)

What does Copy 5 by 5 mean?

"Five by five" therefore means a signal that has excellent strength and perfect clarity — the most understandable signal possible.

When operating a VHF marine radio when should the term MAYDAY be used?

MAYDAY - distress signal, requires the most urgent response. This signal is only to be used when a person, or boat is threatened by grave or imminent danger, and requires assistance.

How do you call the Coast Guard on a VHF radio?

Press and hold the button until the radio “beeps”. The DSC signal will tell the Coast Guard your boat's information. Select the nature of your call (if your radio allows you to make this selection). Say loud and clearly “Mayday, Mayday, Mayday.

Why do you say MAYDAY 3 times?

Convention requires the word be repeated three times in a row during the initial emergency declaration ("Mayday mayday mayday") to prevent it being mistaken for some similar-sounding phrase under noisy conditions, and to distinguish an actual mayday call from a message about a mayday call.

What are the 5 distress signals?

Distress signals

• 'mayday, mayday, mayday' in emergencies only.
• 'pan pan, pan pan, pan pan' for urgent messages that aren't emergencies.
• SOS in Morse code (using marine radio or another signalling method).

What is spoken emergency signal for man overboard?

MAYDAY signal is used during distress situations indicating that: “A mobile unit or person is threatened by grave and imminent danger and requires immediate assistance”. In other words, it is too late to do anything to avoid the danger.

What does MAYDAY mean on a boat?

MAYDAY calls are used for life-threatening emergencies. Pan-Pan calls (pronounced "pahn-pahn") are used for urgent situations that are not life-threatening such as your pleasure craft is broken down, out of gas, or lost in fog.

Why does the Coast Guard say Pon Pon?

Any mariners wishing to render assistance should contact the Coast Guard on Channel 16.” Pan-pan is the international urgency call indicating that someone aboard a boat is declaring an urgent situation that is not an immediate threat to either the vessel or the people on board.

Why do soldiers say over?

5) Use “CLEAR”, “OVER”, “OUT” when you finish your message. It notifies the addressee that you finished your portion of information and wait for the response or just ended the transmission (“OUT” word).

What does Roger over and out mean?

"Over" is used at the end of a statement to mean that the message is complete and a reply is expected. "Out" means the message is complete and no reply is expected.

What does Lima Charlie mean in military?

Lima Charlie: Loud and Clear. Oscar-Mike: On the Move. Tango Mike: Thanks Much. Tango Uniform: Toes Up, meaning killed or destroyed.

Why do we say copy on the radio?

“Copy” has its origins in Morse Code communications. Morse Code operators would listen to transmissions and write down each letter or number immediately, a technique called “copying.” Once voice communications became possible, 'copy' was used to confirm whether a transmission was received.